Ocpuritech  >  AI - Page Sitemap  >  500lph electrodeionization osmosis personalized for food industry
500lph electrodeionization osmosis personalized for food industry

500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry
  • 500lph electrodeionization osmosis personalized for food industry

500lph electrodeionization osmosis personalized for food industry

Ocpuritech edi water treatment system needs to be checked and evaluated. It is checked with regard to shrinkage, oil and water repellency, print durability, seam performance, and side seam twist performance. This product has been exported to more than 130 countries
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:

EDI Stack Inlet Requirements

Capacity

300lph-50000lph

Control type

Micro controller/PLC ( touch screen option)

Recovery rate

≥90%

Total exchange anions (mg/L,as CaCO3)

≤35

Total hardness (mg/L,as CaCO3)

≤1

TOC(mg/L)

≤0.5

Residual chlorine(mg/L)

≤0.02

Oxidizing agent

0

Silicon dioxide(mg/L)

≤0.5

SDI15

<1

PH

7-9

TMP(℃)

5-35

Variable valency metal(mg/L)

Fe≤0.01 Mn≤0.01

Pressure(bar)

≤4

product Introduction

b
500lph electrodeionization osmosis personalized for food industry-1
EDI,CEDI(Electro-deionization) is a process that uses ion exchange resins to absorb ions from a dilute water stream and then transports the absorbed ions through ion-exchange membranes into a concentrate water stream under the influence of an applied electro field. In the process,ion exchange resins do not need to be regenerated via acid or alkali. This new technology could replace traditional Electrode ionization (DI) equipment, produces ultrapure water whose resistance can reach 18 MΩ·cm Based on your raw water quality and produced water requirements ,it can all be fully customized and designed by our professional engineers to meet your business requirements.


500lph electrodeionization osmosis personalized for food industry-2                

EDI Stack Structure


500lph electrodeionization osmosis personalized for food industry-3                

EDI System Flow Chart


Typical Applications

product details

bg


                   
Front view
                   
++
500lph electrodeionization osmosis personalized for food industry-4
                   
Back view
                   
++
500lph electrodeionization osmosis personalized for food industry-5
                   
Slide side
                   
++
500lph electrodeionization osmosis personalized for food industry-6

Features

bg
500lph electrodeionization osmosis personalized for food industry-7
A mixed bed ion exchange unit has to be regenerated by using acid and alkali, but an EDI system does not need to be involved in such a process. This is the fundamental advantage of EDI technology over the conventional ion exchange technology. Furthermore, this advantage can be expressed into other aspects as listed below. 1.EDI process does not consume regeneration chemicals. 2.EDI process does not create waste water and is much more environmental-friendly. 
 3.EDI systems do not require shutdown for regeneration. 
 4.EDI systems are smaller than mix bed ion exchange units. 
 5.EDI process provides water with consistent quality. 
 6.Operating expenses are lower than that of ion exchange units. 


Applications

bg
500lph electrodeionization osmosis personalized for food industry-8

Pharmaceutical and bio-medical industries 
 Steam Generation / Boiler Feed /Microelectronics / Semiconductor /makeup use water Surface finishing /Chemical manufacturing

Desalination equipment is a special water treatment equipment that removes salt, various impurities and salt in water and is widely used in various industrial industries. EDI ultra-pure water technology has advanced technology, simple operation, and no pollution. It is a clean production technology and has been widely used in the fields of microelectronics, power industry, pharmaceutical industry, chemical industry and laboratory.


CE certificate

bg

CE certificate is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).


 The CE marking is also found on products sold outside the EEA, This makes the CE certificate recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States.


Our water treatment system and water treatment accessories all have been certificated by CE and provide 1-year warranty, many clients are very recognized for the quality of our products, we are your trusted partners, contact us now!

500lph electrodeionization osmosis personalized for food industry-9            

500lph electrodeionization osmosis personalized for food industry-10     

The design of Ocpuritech edi water treatment system covers many essentials in the fashion industry. The essentials mainly include color, silhouette, proportion, fabric, texture, sampling flat pattern, cutting and so on. It helps protect phones further against normal wear and tear
Ocpuritech edi water treatment system goes through complete production processes. They are the following aspects: CAD construction design based on feet shape, pattern making, materials cutting, stitching, and final assembly. The product is easy and quick to install
Ocpuritech edi water treatment system is designed under the combination of various factors. They are lines, body proportion, style, color and texture, aesthetic sense, and others. This product keeps the mobile phones safe while users carry them
A comprehensive performance testing for Ocpuritech electrodeionization is offered. The testing includes rubbing fastness, tearing strength, colorfastness, washing stability, just to name a few. This product has been exported to more than 130 countries
The design of Ocpuritech electrodeionization takes into considerations many things. They are the comfort, cost, features, aesthetic appeal, size, and so forth. It protects each part of the phones against drops as well as any other impact damage
The product is built to last. It does not prone to have fatigue failure even it goes through a number of repeated loading and unloading cycles. It provides maximum protection against dust, dirt, and bumps
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...