how to setup a reverse osmosis system How to Use the Pinnacle Platinum Plus Baitcast Reel-Ocpuritech

how to setup a reverse osmosis system How to Use the Pinnacle Platinum Plus Baitcast Reel

by:Ocpuritech     2019-08-15
how to setup a reverse osmosis system How to Use the Pinnacle Platinum Plus Baitcast Reel
Pinnacle Platinum Plus is a lowIntroduction to baitcasting reels.The reels have good ratings and, although it is not "top notch", many anglers like the consistency and durability of the reels.It has a 6.2: 1 gear ratio, weight less than 9 ounces.Reels can hold 12-120 yardsThe graphite frame reduces the overall weight of the pound test line and reel.The reel also has a side plate that allows easy access to the reel for maintenance.Description difficulty: connect the reel to the baitcasting rod in moderation.Label side running 12-From the line shaft down the pound gauge fishing line through the rod-directed reel.Use the arbor knot to connect the end of the line to the spool of the reel.Place the line between the pages of a thick book, such as a phone book or a dictionary.When you turn it on the reel, the book puts the tension on the line.This will reduce the tangle of the future.You can also have someone put the wire source on a screwdriver or other object that allows it to turn, but with it you can keep the tension on the line.You don't need the book in this case.Turn the handle of the reel until there is a line of 100 to 120 yards on the reel.Turn the handle at a moderate speed and check the reel when turning to ensure that the line is wound evenly and tightly.If the rope is loose, it will be tangled when fishing.Turn the knob on the casting control to adjust the distance.Turn clockwise, vote further, reverseStop casting clockwise.Turn the drag knob located on the side of the reel handle to adjust the drag tension.Turning clockwise will tighten the resistance.Turning clockwise will relax the resistance.Use a button to cast bait or bait.Once the line is in the water, turn it backSwitch back to the on position.The switch only allows you to turn in one direction.This will reduce the slack of the line and prevent winding.Switch the switch to the "off" position and rotate in both directions.Turn the handle forward to retrieve the line and continue casting and retrieval.Tip: WarningsArticle is an outdoor composition expert by Zach LazzariZach Lazzari.He has experience in website writing and standard newspaper writing.He wrote an outdoor column for The Silver World in Lake Colorado.Colorado Currently completes a bachelor's degree online through Arizona State University and lives in southwest Montana.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...