reverse osmosis holding tank not filling how to set up a miniature reef tank, a short informative -O

reverse osmosis holding tank not filling how to set up a miniature reef tank, a short informative ...

by:Ocpuritech     2019-06-25











Building your own nano reef can be very simple, almost the same as a conventional size reef.This paper will introduce the basic knowledge of the establishment of nanoreefs, as well as the necessary equipment.This article serves only as a guide, not as a complete and in-depth approach step by step.First of all, you need to pick the aquarium you want to use.The standard 10-gallon, 15-gallon or 20-gallon aquarium has three good starting sizes.Next, you need to decide which lighting system you want to use.It is highly recommended to use a compact power modification kit and canopy.These compact power lights will provide plenty of light for your nano reef for many types of corals such as Xenia and Button coral.For heaters, we strongly recommend the use of 50 w or 75 w Ebo Jager brand heaters as users of these heaters have been successful in such a small aquarium.Finally, you need a small power head pump for circulation and an adequate filter.I found the mini of the aquarium system.The jet pump should be quiet and reliable, but all other pumps of similar size can work properly.For your main filtering, we recommend using fullnatural method.Quality Living Rock and living sand are the key to a successful system.You will want to use at least one pound of live rock per gallon, about one pound of live rockHalf a pound of live sand per gallon.www.ocreef.When you are looking for a location to place the nano reef, you will want to remember something.Tanks should be placed in one that can support about 70-250 pounds depends on the size of the tank.For beginners, it is recommended to put the tank in a busy area of traffic so that it is subject to constant supervision, especially when the tank is still stable.You need good de-when filling the tank with water-Chlorine water;Reverse osmosis water is recommended and you can find R.O.Water in most local pet fish shops.You also need to have a high quality synthetic reef salt and specific weight meter (more commonly used than weight meter ).The floating specific weights can be purchased for less than $10 and provide a basic reading of the specific gravity (salt concentration of a few parts per million ).If money allows, it is recommended to use a more expensive Flamer for high-precision reading.Follow the manufacturer's instructions on adding salt, continue to add salt with water.Continue to add salt until the proportion is 1.023.Put the power head in immediately, which helps to mix the salt.It is also time to raise the water temperature to 78 degrees.Once your weight reaches the appropriate level, the water starts to stabilize (this time it will vary depending on your special settings) and can add live rock and live sand.First place the live rock using an open pattern so that the fish has space to swim and hide in the rock.In the process, you should be as creative as you can, and don't be afraid to change it after you go back.Once the rock is where you like it, you can pour the live sand around the Rock and maintain a fairly uniform thickness throughout the tank.Adding live sand will cloud the water, but don't worry that it will eventually settle down and the water will be clear.Keep checking if your water is stable.When your aquarium is fully completed with cycling and all of your confident water parameters look stable, you can add fish and coral.But don't rush to the process and take the time to get a return on the salt water hobby.The last reminder, because we can't write a book here, is to make sure to do your homework and study the kinds of fish and corals you want to keep;(Try to provide them with food they naturally get from the ocean ).That way, you know how to take care of the little ones when you take them to their new home.www.ocreef.com.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标