Water softener is an important household appliance in the United States.They usually don't cause a lot of trouble to users, but sometimes they cause some problems due to maintenance irregularities or some installation defects.It is easier to solve these problems through this article.If water is usually scarce from sources such as rivers, lakes, dams and other bodies of water, groundwater is mainly used.There are reservoirs underground, which are available to the public after placing water in a water purification system
.Now the groundwater is not ready to use this water.It is hard water with traces of calcium, magnesium and limestone inside.It is rarely used for household purposes such as cleaning, bathing or drinking.In order to make it suitable for daily use and consumption, it needs to be converted into soft water.This is where the water softener enters the picture.They can be called water filter
s that soften water by eliminating all unnecessary hard water elements and make them useful for daily use with the help of two water tanks.One is filled with salt and the other is filled with special resin.These resins have the ability to soften water.For ordinary families, the water softener is generally used twice a week.Although they are not used on a daily basis, regular maintenance is required.If you don't do this, it can cause a lot of problems and bring you a lot of inconvenience.Many people lack an understanding of the exact location of the problem.: The most common problem observed is that it produces not soft water, but hard water.The possible reason for this is that the salt content in the salt tank is reduced, or the bypass valve of the water softener remains open.In order to solve the problem of salt, it is recommended to check the content of salt regularly.If the level drops, it needs to increase.If the bypass valve is found to be opened, it needs to be closed in time, otherwise the problem will not be solved no matter how correct the salt content is.: Now, this issue has to do with the incorrect installation of the device.At the time of installation, understand the availability of the inlet pressure, the necessary flow rate, and the pipeline layout of the place.It should be remembered that the higher the pipe line, the lower the pressure.Ideally, the pressure drops by about 1 psig per 2 feet or so.Therefore, in order to obtain the correct water pressure, it is necessary to consider this descent and install the system accordingly.: Sometimes this happens, when the control valve
is in its place of use, the water begins to leak from the drain pipe.However, if the piston seal is damaged due to breakage, or other foreign objects are found between the piston and the seal, this is found.To solve this problem, it is recommended to replace the piston and its SEALs together.These are the common problems of water softener.In fact, you will never have any problems with the water softener, and, if you install it correctly and maintain it regularly, it will serve you for a long time.But, after all, it's a machine and there's definitely a problem at some stage.So the next time you see any defects, remember these tips and take the appropriate steps to fix them.