water tank distributor How to Build a Wood Water Tank-Ocpuritech-img

water tank distributor How to Build a Wood Water Tank

by:Ocpuritech     2019-07-28
water tank distributor How to Build a Wood Water Tank
For whatever purpose, if you decide to build a wooden tank then you will end up with a project that looks elegant.It is important to remember that the weight of a gallon of water is 8 lbs.34 lbs.As the size of the wooden water tank increases, the weight of the water also increases to nearly 8,000.
For a tank of 8 feet by 4 feet.
Therefore, for a wooden storage tank, the wooden beams, seams and seals are under great pressure.Make a plan for your wooden tank.Start with 1-1 boxThick plywood in inches.Your plan should include inserting the cement board lining in the plywood box and adding a layer of plastic lining to both sides of the cement board.
Also plan to use 2-by-4 or 2-by-Eight ribs are surrounded by wooden cans, ranging from 3 to 4 inch.Steel L should also be used to connect ribsbrackets.Cut the plywood box and screw it together.
When you screw in the bracket to connect the parts together, you may need an assistant to fix the walls of the tank together.Cut and bind on plastic lining.Cutting and screwing into another layer of plastic lining on a concrete Board will help provide easier cleaning and maintenance for the tank.According to the water inlet and drainage system you plan to use for your wooden water tank, drill out the drainage holes near the bottom and top side of the water tank.
Seal the joints of the concrete box with waterproof epoxy resin.When applying marine grade epoxy, be sure to wear a respirator mask.Build a rib belt around the tank.Lay the 2-by-4 or 2-by-8 pieces, make 2-Inch side to the tank, fix them on plywood using electric drills and screws.
Use L-The bracket that connects every corner of the band.Leave room for the band so they are no more than 4 inch apart.If you want to design your tank with more steel bars, or if you use salt water, you need to bring the straps closer.
Fill in all the seals and apply heavy-Obligation outdoor finishes to help protect the wood.When you fill your tank, pay attention to the signs of bending and leakage through cracks in plywood and straps and seals
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标