ways to purify water for drinking - reverse osmosis full house system-Ocpuritech-img

ways to purify water for drinking - reverse osmosis full house system

by:Ocpuritech     2019-11-21
ways to purify water for drinking  -  reverse osmosis full house system
Boiling is one of the first ways to purify drinking water.
Bring the water to a boil, and once this is reached, all creatures will die.
If you make your water boil longer and there is some chemical contamination in it, most chemicals will evaporate from it.
However, not all chemicals will evaporate from your water.
You also have to filter out any solids that may exist in the water.
Disinfection of disinfectant water is done by adding a chemical to kill bacteria, bugs and viruses.
You can use household bleach containing 5.
25% sodium hypochlorite, there is nothing else in it.
Add 16 drops in 1 gallon of water and let it sit for 30 minutes.
You can also get clo2 tablets that are good for our camping and backpacks.
The use time of iodine purification tablets is very long.
However, they may be harmful to people with thyroid disease and will not kill the cyst of the cryptospores.
They also left a very unpleasant taste of water supply.
The use of UV or UV rays can kill bacteria, cysts, and viruses.
Water passes through a chamber that glows under ultraviolet light.
It is something that kills or sanitizes all unwanted creatures.
The system will not remove any other types of pollution.
The water through this process must be clear and most of the iron is removed.
The protective cover of the lamp must always be kept clean, otherwise the lamp will not be able to reach the water to complete the work.
This type of system can be found in home use until commercial use in public buildings.
The distillation or distillation of water is done by boiling the water, then capturing the steam and cooling it down to turn it back into water.
This will remove solids and non-solids
Vaporize pollutants like metals and minerals.
Chemicals that can be evaporated with water are transferred to the cleaning side of the system.
Since all minerals have been removed by distillation, drinking water has been carefully examined by the medical community.
You can always take mineral supplements to make sure you get what you need.
You can buy household distillation equipment that distillates one gallon at a time.
The cost of these devices is less than $100.
I used one of the units at home and left the liquid color very yellow after finishing.
I also have water in the city.
I want to know what's left behind my non-drink.
From simple faucet filters to reverse osmosis filters are the way to filter water.
An easy way to filter drinking water is to install a faucet filter.
You can get these in 1 to 3 stages of filtering.
The more series the filter has, the more types of contaminants it will remove.
They will eliminate sediment, lead, and microbial cysts of cryptodia and giardynia.
You can go from a cabinet table filter system with more levels and filter capacity to a full-level filter system
Whole house filtration system.
You can customize the filtration system based on the water contaminants you also have.
All you need to do is analyze your water sample and build your filtration system from there.
One thing to note when looking at the reverse osmosis system is that it uses a large amount of water to recover a small amount of clear water.
As clean water, you may only get five to 15% of the treated water.
The rest of the water flows down the drain.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...