Automatic boiler softening equipment of three types of flow control?
Enterprise needs in the use of boiler automatic boiler softening equipment mainly adopts the international advanced demineralized water preparation technology and the technology, equipment, material adopt high quality glass reinforced plastics, stainless steel or carbon steel lining plastic anti-corrosion materials, equipment, quality excellent, stable and reliable performance, realizes the full automatic operation of the boiler softened water equipment
, no need of personnel management, cost performance is higher than the domestic similar products, widely used in all parts of the country, the result is good.
1, single pot flow control type automatic boiler softening equipment: including single pot type flow control device for regeneration will stop supply water softening, if choose this series of products, therefore, should be equipped with a soft water tank can use at least two hours.
2, double tank flow control softening water equipment: 2 by the control system and the resin tank, salt box and related line double tank flow control device, consisting of the controller according to water consumption control two tanks of water production, backup and regeneration of switch, to ensure that at any time there is always one in the work state of tank, able to continuously supply water softening.
Demineralized water equipment with a total of two resin tank, one with a case, the tank has reached the awaited state after regeneration, once one of the tanks automatically or manually enter a state of regeneration, another immediately into the work state automatically.
This kind of equipment of water rate by equipment recycling process changes.
Equipment with a total of two resin tank, two cans of running at the same time, the regeneration time, regeneration after producing water exchange can begin immediately.
In tanks with phase, the theory of the device water rate is a series of two times, but the equipment per cycle (
About 24 hours)
About three hours a exchange tank in water production, another is in a state of regeneration.
3, three cans of flow control type demineralized water equipment: automatic boiler softening equipment with a total of three resin tank, and a case, the exchange can automatic enter standby state after regeneration.
Once one of the other two tanks automatically or manually enter a state of regeneration, the standby can immediately enter the work state automatically.
This kind of equipment of water rate by equipment recycling process change;
Demineralized water equipment with a total of three resin tank, three cans of running at the same time, the regeneration time, regeneration after producing water exchange can begin immediately.
With the same tanks, the theory of demineralized water equipment water rate is 2 -
A series of three times, but the equipment per cycle (
About 24 hours)
About four hours to two exchange tank in water production, another is in a state of regeneration.
come in many forms, like water purification unit and pure water treatment plant, and they all provide efficient solution for our water purification unit needs.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. provides various models for the pure water treatment plant, as this being the most beneficiary equipment in water purification unit. Extra features of pure water treatment plant water treatment systems
make it an perfect tool in the water purification unit aspect. Visit Ocpuritech water treatment for the professional assistance by the experts.
Among improvements to water treatment systems, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.