Automatic softening water equipment is not the same as the actual water yield-Ocpuritech-img

Automatic softening water equipment is not the same as the actual water yield?

by:Ocpuritech     2020-08-05
Automatic softening water equipment is not the same as the actual water yield? Have client after use reflection, when buying automatic softening water equipment set water rate, but can not meet the requirements in actual use. What causes the happening of this kind of situation? Let us know about the automatic softening water equipment through this article water yield can not meet the requirements of the reasons, and to find a suitable solution. 1, to soften the lower the resin layer height resin to make effective, the greater is the impact on the velocity of the exchange capacity. When the resin for 19 - storey height To 30 feet ( 762mm) , the resin layer height caused by the velocity of the exchange capacity can be reduced to the influence of low degree, therefore suggested that the resin layer height is greater than 800 mm. 2, during the processing of low flow speed usually velocity, the greater the ion exchange needed for the work, the greater the effective utilization rate of resin will fall, but the equipment unit time water production capacity will increase. Whereas velocity is smaller, the smaller the work required layer resin utilization will increase, but the equipment unit time water production capacity will decline. Reasonable to improve the equipment capacity of water exchange flow and exchange capacity is very important. General advice in 20 - operating velocity control 30m/h( The 4 - 10gpm/ft2) 。 3 and water contact with the resin layer of time is too long, the longer the time of contact with the resin exchange more fully, resin exchange capacity of unit volume increase, but the yield of per unit time resin in water. Shorter contact time, exchange is inadequate, resin exchange capacity of unit volume to drop, and water production capacity of the resin to improve per unit time. Therefore the reasonable contact time are very important to for economic operation of the water softener. Water flow per hour for 8 - resin loading volume 40 times.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. have long believed that management practices are an important element in productivity.
Check out Ocpuritech water treatment for optimal quality products, and get your water treatment systems problem fixed. Send us an enquiry or make a call if you are interested.
Forging an tight connection starts with understanding your potential customers and catering to their needs on water treatment systems, both with a quality product and impactful pure water treatment plant.
The water purification unit water treatment systems is an all-servo system capable of storing hundreds of pure water treatment plant process parameters to provide custom water purification unit profiles for each pure water treatment plant type and water purification unit configuration.
Further dialogue of Ocpuritech between the approaches, the chapter concludes, could lead to actionable advice on more robust policies that drive both structural change and competitiveness upgrading.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标