Ocpuritech  >  AI - Page Sitemap  >  best edi water system osmosis manufacturers for seawater
best edi water system osmosis manufacturers for seawater

best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater
  • best edi water system osmosis manufacturers for seawater

best edi water system osmosis manufacturers for seawater

Ocpuritech edi water system has to go through a series of processing methods. These methods, including heating, cooling, disinfection, and drying, are in line with the latest building standards. It presents a high-end effect for the handbag with its stylish curve
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:

EDI Stack Inlet Requirements

Capacity

300lph-50000lph

Control type

Micro controller/PLC ( touch screen option)

Recovery rate

≥90%

Total exchange anions (mg/L,as CaCO3)

≤35

Total hardness (mg/L,as CaCO3)

≤1

TOC(mg/L)

≤0.5

Residual chlorine(mg/L)

≤0.02

Oxidizing agent

0

Silicon dioxide(mg/L)

≤0.5

SDI15

<1

PH

7-9

TMP(℃)

5-35

Variable valency metal(mg/L)

Fe≤0.01 Mn≤0.01

Pressure(bar)

≤4

product Introduction

b
best edi water system osmosis manufacturers for seawater-1
EDI,CEDI(Electro-deionization) is a process that uses ion exchange resins to absorb ions from a dilute water stream and then transports the absorbed ions through ion-exchange membranes into a concentrate water stream under the influence of an applied electro field. In the process,ion exchange resins do not need to be regenerated via acid or alkali. This new technology could replace traditional Electrode ionization (DI) equipment, produces ultrapure water whose resistance can reach 18 MΩ·cm Based on your raw water quality and produced water requirements ,it can all be fully customized and designed by our professional engineers to meet your business requirements.


best edi water system osmosis manufacturers for seawater-2                

EDI Stack Structure


best edi water system osmosis manufacturers for seawater-3                

EDI System Flow Chart


Typical Applications

product details

bg


                   
Front view
                   
++
best edi water system osmosis manufacturers for seawater-4
                   
Back view
                   
++
best edi water system osmosis manufacturers for seawater-5
                   
Slide side
                   
++
best edi water system osmosis manufacturers for seawater-6

Features

bg
best edi water system osmosis manufacturers for seawater-7
A mixed bed ion exchange unit has to be regenerated by using acid and alkali, but an EDI system does not need to be involved in such a process. This is the fundamental advantage of EDI technology over the conventional ion exchange technology. Furthermore, this advantage can be expressed into other aspects as listed below. 1.EDI process does not consume regeneration chemicals. 2.EDI process does not create waste water and is much more environmental-friendly. 
 3.EDI systems do not require shutdown for regeneration. 
 4.EDI systems are smaller than mix bed ion exchange units. 
 5.EDI process provides water with consistent quality. 
 6.Operating expenses are lower than that of ion exchange units. 


Applications

bg
best edi water system osmosis manufacturers for seawater-8

Pharmaceutical and bio-medical industries 
 Steam Generation / Boiler Feed /Microelectronics / Semiconductor /makeup use water Surface finishing /Chemical manufacturing

Desalination equipment is a special water treatment equipment that removes salt, various impurities and salt in water and is widely used in various industrial industries. EDI ultra-pure water technology has advanced technology, simple operation, and no pollution. It is a clean production technology and has been widely used in the fields of microelectronics, power industry, pharmaceutical industry, chemical industry and laboratory.


CE certificate

bg

CE certificate is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).


 The CE marking is also found on products sold outside the EEA, This makes the CE certificate recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States.


Our water treatment system and water treatment accessories all have been certificated by CE and provide 1-year warranty, many clients are very recognized for the quality of our products, we are your trusted partners, contact us now!

best edi water system osmosis manufacturers for seawater-9            

best edi water system osmosis manufacturers for seawater-10     

Ocpuritech edi plant water treatment has passed through a complete and complex processing method which includes preliminary testing, inspection, dimensioning, setting, damage analysis. Its burr-free surface comes with a smooth touch
Manufacturing of Ocpuritech edi plant water treatment is a complex process. It begins with mining and then grinding raw materials to completion of heating, cooling, and drying. It is regarded as valuable accessories in Europe and the United States
Manufacturing of Ocpuritech edi plant water treatment involves various processes. It begins from the extraction of raw materials, mixing and preheating, heating, cooling, and final treatment. It has undergone strict tests including salt spray and nitric acid test
Ocpuritech edi water system undergoes four basic production processes which are all up to industry standards including high-temperature cooling, heating, disinfection, and drying. It has the ability to tolerate greater tension than other suchlike
The production of Ocpuritech edi plant water treatment is fully automated. The necessary amounts of raw materials or water are exactly calculated by the computer. Water splashes will not leave water spotting on the surface of the product
The complete manufacturing process of Ocpuritech edi plant water treatment is strictly overseen, from sourcing safe and sustainable wood materials to conducting inspections of health and safety. Though it is lightweight, the product features long-term durability
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...