Common stainless steel industrial water purification equipment replacement filter column step what are they?

by:Ocpuritech     2020-08-13
Common stainless steel industrial water purification equipment replacement filter column step what are they? Both people's life and industrial production and water, the water pollution is serious in today's society, many industrial production water was. In order to solve this difficult appeared on the market of stainless steel industrial water purification equipment, water quality, stability, the characteristics of easy installation. In use after a period of time in filtration column is required to ensure the quality of the water, the meters under the environment protection to introduce the stainless steel industry under the water purification equipment replacement filter column method. 1, the stainless steel industrial water purification equipment adjustment for & other 备用” State, terminal filter, open water switch, the system pressure relief, after being confirmed stainless steel industrial water purification equipment without the water out, close the water switch. 2, light pull to the left positive blue door lock piece of stainless steel industrial water purification equipment ( The upper one) , opened the door of the blue, will & other; 量子” Column, then equipment is on the right side of the white & other QGARD” The column top lid open, remove the metal lock plate, pour & other; QGARD” The column. 3, the new & other; QGARD” Column loaded on the stainless steel industrial water purification equipment, pay attention to the metal rod on the water purification equipment should aim at hole for the pillars, and left tight, locked metal lock in metal bar card slot, button on the top lid. Then a new & other; 量子” Column into the blue door, is a bit hard to push into the tight, close the blue door, need to hear two lock & other; Click & throughout; Voice, to confirm the pillars have been put in place. 4, attached to the pipe joint screw into the water in the handle, connect the hose to the sink. Open water switch, the system will automatically into the exhaust air program for 5 minutes, after 5 minutes, the system will automatically enter the & other; 操作” State. 5, pipe fittings and hose, mount terminal filter. Note don't tighten the filter on the air cap, open water switch, when the water flows out from the air cap, then tighten the air cap. 6, post completed, the system in & other; 操作” State of more than 12 hours, can be normal use.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...