Company Advantages1. For Ocpuritech water treatment, excellent design should be a perfect combination of appearance and performance. Low consumption of Ocpuritech machines can help you save your cost
2. Years of application prove the broad market acceptance of this product. Easy installation can be guaranteed by Ocpuritech
3. The high performance of our electrodeionization mainly lies in edi water system manufacturers.
EDI Stack Inlet Requirements
Capacity | 300lph-50000lph |
Control type | Micro controller/PLC
( touch screen option) |
Recovery rate | ≥90% |
Total exchange anions
(mg/L,as CaCO3) | ≤35 |
Total hardness
(mg/L,as CaCO3) | ≤1 |
TOC(mg/L) | ≤0.5 |
Residual chlorine(mg/L) | ≤0.02 |
Oxidizing agent | 0 |
Silicon dioxide(mg/L) | ≤0.5 |
SDI15 | <1 |
PH | 7-9 |
TMP(℃) | 5-35 |
Variable valency metal(mg/L) | Fe≤0.01 Mn≤0.01 |
Pressure(bar) | ≤4 |
EDI,CEDI(Electro-deionization) is a process that uses ion exchange resins to absorb ions from a dilute water stream and then transports the absorbed ions through ion-exchange membranes into a concentrate water stream under the influence of an applied electro field. In the process,ion exchange resins do not need to be regenerated
via acid or alkali. This new technology could replace traditional Electrode ionization (DI) equipment, produces ultrapure water whose resistance can reach 18 MΩ·cm
Based on your raw water quality and produced water requirements ,it can all be fully customized and designed by our professional engineers to meet your business requirements.
Typical Applications
A mixed bed ion exchange unit has to be regenerated by using acid and alkali, but an EDI system does not need to be involved in such a process. This is the fundamental advantage of EDI technology over the conventional ion exchange technology. Furthermore, this advantage can be expressed into other aspects as listed below.
1.EDI process does not consume regeneration chemicals.
2.EDI process does not create waste water and is much more environmental-friendly.
3.EDI systems do not require shutdown for regeneration.
4.EDI systems are smaller than mix bed ion exchange units.
5.EDI process provides water with consistent quality.
6.Operating expenses are lower than that of ion exchange units.
Pharmaceutical and bio-medical industries
Steam Generation / Boiler Feed /Microelectronics / Semiconductor /makeup use water
Surface finishing /Chemical manufacturing
Desalination equipment is a special water treatment equipment that removes salt, various impurities and salt in water and is widely used in various industrial industries. EDI ultra-pure water technology has advanced technology, simple operation, and no pollution. It is a clean production technology and has been widely used in the fields of microelectronics, power industry, pharmaceutical industry, chemical industry and laboratory.
CE certificate is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
The CE marking is also found on products sold outside the EEA, This makes the CE certificate recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States.
Our water treatment system and water treatment accessories all have been certificated by CE and provide 1-year warranty, many clients are very recognized for the quality of our products, we are your trusted partners, contact us now!
Company Features1. Guangzhou Aomi Water Purification System Manufacture Co., Ltd., one of the largest solution supplier, is reliable in global market for its electrodeionization .
2. Ocpuritech has advanced facilities and technology to manufacture edi system.
3. Customer service in Guangzhou Aomi Water Purification System Manufacture Co., Ltd. grows out of the belief that edi water system manufacturers. Please contact.