how the water filtration process works-Ocpuritech-img

how the water filtration process works

by:Ocpuritech     2020-01-11
The water filtration process removes undesirable biological contaminants, chemicals and other compounds from raw material water, making it suitable for drinking or use in scientific or industrial applications.
There are several ways to clean water, which are often used together to achieve the best results.
Drinking water standards and purity for scientific and medical use are established by management agencies that set limits on allowable concentrations of contaminants.
The only way to tell if it meets these criteria is to test it.
Even the clear water can be contaminated and it is impossible to see if it is pure enough to drink.
Water may not be safe to drink after passing a filtration process.
Boiling water, for example, kills biological substances, but does not remove chemical contaminants that may be dangerous if ingested.
That\'s why many people install purifiers at home.
Their water is pure and safe, which increases the sense of security.
The most common water filtration systems for home use are carbon filters, reverse osmosis systems, and distillation equipment.
Each has its own advantages and disadvantages.
Most home systems combine at least two methods in the filtering process.
For example, carbon filters are often used in distillers.
When carbon removes gas from Steam, the distiller removes solid contaminants.
For home use, the water filtration process usually occurs near the point of use, such as under the kitchen sink.
In this way, when the water used for bathing or laundry is not purified, it is used for drinking and cooking.
This can reduce the wear of the filter and reduce the cost.
For commercial use, the water filtration process often occurs at the entry point of the main line, so there is pure water throughout the building.
The laboratory usually includes entry points and use point filters.
This provides pure water for the entire laboratory, but the use of dedicated filters added at certain points on the production line can improve the purity of specific applications.
Pure water is available in most industrialized countries, but there are still millions of people who cannot get it.
In these cases, or in disaster and emergency situations, an emergency water filtration process can be established to ensure safe drinking.
To do this, filter out the obvious solids from the water and boil for at least a minute.
This kills the creature but does not clear the chemicals.
If there is a carbon filter, these chemicals can be removed with a carbon filter.
If it cannot be boiled, it can be purified with a ratio of 1/8 teaspoon to a gallon of water with ordinary bleach.
Let the water calm for at least thirty minutes before drinking water.
Although this is a coarse water filtration process, it can remove many dangerous pathogens.
The filtration process can be as simple as boiling water, or it can be treated with water by the addition of the body, precipitation, filtration and disinfection, as in the municipal treatment plant.
This is both ends of the extreme.
Most people will be more familiar with using point or countertop purifiers.
All of this is working towards the same goal, which is to provide a drink that is safe enough for humanity.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标