How to deal with the prevention of water leakage in the treatment equipment of reclaimed water and w

How to deal with the prevention of water leakage in the treatment equipment of reclaimed water and water leakage?

by:Ocpuritech     2021-03-13
How to deal with the prevention of water leakage in the treatment equipment of reclaimed water and water leakage? Author: water reuse water treatment equipment use, users have found water reuse water treatment equipment appeared leakage is a serious problem affecting water supply, many people are not special attention, I thought to be a small problem, small problems but slowly The development of the system will gradually become a big problem, and it should also attract our attention. If there is a water leakage, we must determine the cause and solve the problem in time to ensure that the reclaimed water treatment equipment can return to normal use and ensure the safety and stability of the equipment. Let’s take everyone to understand the common causes of water leakage in the reclaimed water treatment equipment: incorrect installation of accessories. Because the reclaimed water treatment equipment is assembled from multiple parts, and if some parts are installed during installation, Wrong, there will be water leakage. Therefore, it is necessary to pay attention to the installation in strict accordance with the reference manual when installing. In addition, users usually do not know how to install, and need to hire professional staff to do this work, and must carefully follow each step of the operation, so as to ensure that there will be no water leakage during future use. The sealing rubber ring is not installed properly. There are many sealing rubber rings on the reclaimed water treatment equipment, which play a good fixed role. If the filter sealing rubber ring is not installed properly, or the position is not reasonable, and the connection is not tight, water leakage may occur. In this case, the rubber ring can be reinstalled, and the problem of water leakage can usually be solved. Incorrect installation of the water pipe The water pipe of the water reuse treatment equipment helps to transport the water source. When connecting the internal filter element, the quick connector is usually used to help the connection. At this time, if there is a water leakage, you can check the water pipe and the joint. Is the connection between them tight enough? If the head of the water pipe is not flat, you can cut off a section, keep the head intact, and then connect it to the joint. In addition, you can also pull it several times to avoid water leakage. Turn on the power, fill in water, and see where the water is leaking. Check for leaks in the pipeline. In view of this fault, check the water circuit of the equipment to find the leaking point; if it is not easy to find, use a dry facial tissue to check to see if the internal parts of the equipment are rusted or the screws are loose and cause water leakage. The above is the editor’s introduction to what to do if the reclaimed water treatment equipment leaks. Only by understanding that the leakage of reclaimed water treatment equipment is common, we can correctly determine the source of the problem, solve the problem in time, and do not affect the equipment in the future. usage of.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标