How to debug the pretreatment process of automatic reverse osmosis water purification equipment-Ocpu

How to debug the pretreatment process of automatic reverse osmosis water purification equipment?

by:Ocpuritech     2021-06-06
Automatic reverse osmosis water purification equipment how pretreatment process debugging author of the article:? Automatic reverse osmosis water purification equipment capable of long-term stable operation of the purified water supply safety standards for industrial and food production line is based on good process design and operating specifications And maintenance, in order to help everyone better manage the use of automatic reverse osmosis water purification equipment, today I will show you how to debug the pretreatment process of automatic reverse osmosis water purification equipment? The treatment process generally consists of a multi-media filter, an activated carbon filter, a demineralized water filter, etc. The specific debugging methods are as follows: 1. Operation instructions of the multi-media filter 1. First of all, ensure that the host and pretreatment filter are close to the water source and power source. 2. Quartz sand should be installed in the pretreatment filter to make a good advance for the post-processing. Activated carbon should also be installed in another pretreatment device. 3. The waterway must be connected well, otherwise the next step cannot be carried out. First of all, the inlet of the raw water booster pump should be connected to the water source, and then the outlet should be connected to the pretreatment filter. 4. According to the explanation of reverse and forward washing in the operation manual, carry out the backwash and forward washing of the filter material of the filter. Until the water filtered by the filter material becomes clear. 2. Operating instructions of the activated carbon filter 1. Place the activated carbon filter in a suitable place, then remove the control head at the end of the filter, and load coarse quartz sand from bottom to top. After installation, control the top The head is installed. 2. Connect the power and water source. 3. Contrasting with the forward washing and backwashing methods of the filter material in the previous step, carry out forward washing and backwashing on the filter material until the water filtered by the filter is clear. 4. Activated carbon must be bare-packed, otherwise the filtering effect cannot be guaranteed. 3. Operating instructions of the softened water filter 1. Remove the top of the softened water filter and place it in a suitable place, then pour the softened resin into the softened filter, and then tighten the top control head. 2. Connect the power and water source. The pretreatment stage is very important. As long as the pretreatment is done so that the water reaches the standard water that can enter the reverse osmosis, then the next advanced treatment can be carried out and better water quality can be produced. The pretreatment process effect and the process effect of the core reverse osmosis system of the automatic reverse osmosis water purification equipment must be debugged to ensure its stable operation. Therefore, it is necessary for the users of the automatic reverse osmosis water purification equipment to understand the above content.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标