How to install and disassemble the membrane of industrial automatic reverse osmosis pure water equip

How to install and disassemble the membrane of industrial automatic reverse osmosis pure water equipment and matters needing attention?

by:Ocpuritech     2021-04-20
How to install and disassemble the membrane of industrial automatic reverse osmosis pure water equipment and matters needing attention? Author: An important masters or reverse osmosis membrane, drinking water equipment can be used in industrial automatic reverse osmosis water equipment, industrial water equipment, sewage and water reuse. Quartz sand filters, activated carbon filters, and precision filters are usually used as pretreatment. After the reverse osmosis membrane needs to be replaced after a period of use, we need to install and disassemble it. Many people do not know how to install it, which leads to a high rate of damage and replacement of the membrane. Therefore, the reverse osmosis membrane should be installed and disassembled correctly to ensure the working performance of the industrial fully automatic reverse osmosis pure water equipment. Items to be checked before installation of the reverse osmosis membrane: For a new set of industrial fully automatic reverse osmosis pure water equipment, the following must be checked before the reverse osmosis membrane is installed in the pressure vessel: 1. Glycerin for lubrication, fixed tools, and waterproof Rubber shoes, gloves and other protective equipment are ready. 2. Make sure that the pretreatment device (quartz sand or activated carbon filter) in the front is rinsed, and SDI<5.3. Check the inlet pipe upstream of the reverse osmosis membrane to ensure that there is no sludge, oil, metal debris, etc., and confirm The upstream pipelines, pressure vessels and high-pressure pipelines have been flushed. 4. Check whether the pretreatment system is operating normally, and whether the effluent SDI, turbidity, residual chlorine, temperature, pH, ORP, etc. meet the requirements of reverse osmosis membrane water. 5. Check whether a clean filter element has been installed in the security filter before the high-pressure pump. Disassembly of the reverse osmosis membrane: 1. First, remove the external pipelines at both ends of the pressure vessel, remove the end plate seal assembly at both ends of the pressure vessel, and number all the removed parts and put them in order. 2. Push out the reverse osmosis membranes one by one from the water inlet end of the pressure vessel. Only one membrane is allowed to be ejected at a time. When the membrane is pushed out of the pressure vessel, the membrane should be caught in time and the reverse osmosis membrane should be leveled to prevent damage to the central tube connector Damaged by gravity, the reverse osmosis membrane can be rotated appropriately to separate the reverse osmosis membrane from the central pipe connector. The above is the installation and disassembly tutorial of the reverse osmosis membrane. If you are using or will use the industrial automatic reverse osmosis pure water equipment, this article will be of great help to you.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标