How to operate the sedimentation tank of automatic industrial water reuse equipment-Ocpuritech-img

How to operate the sedimentation tank of automatic industrial water reuse equipment?

by:Ocpuritech     2021-06-05
How to operate the sedimentation tank of automatic industrial water reuse equipment? Author: automatic industrial water reuse equipment sedimentation tanks is an important part of the equipment, sedimentation tanks is the application of precipitation removing one structure suspended solids in the water, the water purification equipment. Use water's natural precipitation or coagulation precipitation to remove suspended solids in water. The following editor will introduce how to operate the sedimentation tank of the fully automatic industrial water reuse equipment. 1. The scum is skimmed from the sedimentation tank of the fully automatic industrial reclaimed water reuse equipment, and the scum is picked up with a leaky spoon. Note that it should not be thrown into the effluent water, and should be collected and disposed of. 2. The sedimentation tank is cleaned, and the outlet weir of the primary sedimentation tank should be flushed with water regularly. The dirt hanging on the tooth weir should be removed in time, and the walkways and railings should be kept clean. 3. The paint maintenance of the sedimentation tank parts of the automatic industrial water reuse equipment, the mud valve, the water distribution valve and other iron parts are easy to rust, so frequent paint maintenance is required. 4. The weir plate of the sedimentation tank should be kept level, but after several years of use, due to factors such as uneven settlement, the weir plate often tilts, some of the weir mouths have too much water, and some have too little or even no water. At this time, the weir should be corrected to make it level. 5. Fully automatic industrial water reuse equipment for sedimentation tank discharge. Sludge discharge is the most important operation in sedimentation tank management. The two main points of sludge discharge operation are to master the interval of sludge discharge and the duration of each sludge discharge. If the interval is too long, the sludge may accumulate in anaerobic fermentation and float; if the duration is too long, the moisture content of the sludge will be reduced and the burden of the sludge treatment structure will increase. The interval of mud discharge is longer in winter and shorter in summer. The introduction of how to operate the sedimentation tank of the automatic industrial water reuse equipment is introduced here. The sedimentation tank sometimes has the situation of floating mud, so you can also understand the sedimentation tank of the automatic industrial water reuse equipment What are the reasons for the floating mud? After the problem occurs, it can be solved in time.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标