How to properly clean the salt tank of automatic boiler water treatment equipment-Ocpuritech-img

How to properly clean the salt tank of automatic boiler water treatment equipment?

by:Ocpuritech     2021-07-13
How to properly clean the salt tank of automatic boiler water treatment equipment? Author: With the development of society and the improvement of people's living standards, people's lives in the boiler operator's role has become increasingly widespread. To change the hardness of the water when the boiler is used, automatic boiler water treatment equipment is used. In the automatic boiler water treatment equipment, there is a composition called a salt tank. The role of the salt tank is to react with resin and replace softened water. The salt tank needs to be cleaned after a period of use, because the regeneration of the resin requires industrial salt, and the industrial granular salt contains certain impurities. The accumulation of impurities will affect the salt intake effect after a long time, so it needs to be cleaned. How to clean the salt tank of the automatic boiler water treatment equipment? The working process of the automatic boiler water treatment equipment is that when the raw water with high hardness flows through the resin layer in the equipment, the resin will absorb the calcium and magnesium ions in the water to soften it. Purpose of water quality. When the adsorption capacity of the resin reaches saturation, the salt water in the salt tank will clean the resin layer, thereby reducing the adsorption capacity of the resin. When the user cleans the salt tank of the fully automatic boiler water treatment equipment, he should do it after 2-3 hours of no solid salt can be seen through the peephole of the salt tank. First, open the drain valve at the bottom of the salt tank for waterproofing, take out the filter screen in the tank, and then insert a tap water plastic tube into the salt hole for flushing. Finally, level the filter screen and close the drain valve at the bottom of the salt tank. It is inevitable to use industrial salt to clean the salt tank regularly, but this operation can be avoided if the industrial salt with higher impurities is replaced with special salt for softened water. Pay attention to the lack of salt when using it. If the resin is saturated, the calcium and magnesium ions in the water cannot be removed, so that the water can no longer be softened. Then the water in the automatic boiler water treatment equipment has no meaning to soften, so the automatic boiler water treatment equipment needs to add salt to run better and play its role.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标