How to properly maintain and maintain industrial EDI ultrapure water treatment equipment-Ocpuritech

How to properly maintain and maintain industrial EDI ultrapure water treatment equipment?

by:Ocpuritech     2021-05-04
How to properly maintain and maintain industrial EDI ultrapure water treatment equipment? Author: EDI ultrapure water treatment equipment industry price is relatively high, with the same period of time there will be a problem, to enhance their work efficiency, reduce equipment operating costs, how to pay attention to maintenance is usually pure water equipment do we all? Know that no matter what products and machines need good maintenance and maintenance. So how to properly maintain the industrial EDI ultrapure water treatment equipment? When the customer purchases and installs a set of industrial EDI ultrapure water treatment equipment, the equipment is running non-stop every day, in order to ensure the normal operation of each device and the processing If the water achieves good results, the equipment should be maintained and repaired regularly. Except for the electrical part, which is handled by a dedicated electrician, the rest can be operated by the operator himself. In fact, the daily maintenance of water treatment equipment can be simply started from the following aspects: 1. The personnel operating the industrial EDI ultrapure water treatment equipment must strictly switch the equipment according to the operation process, and the operator needs to perform the equipment within a day At least three inspections to ensure the normal operation of the ultrapure water equipment. 2. The operator should do more than two rounds of inspections a day to ensure that the equipment is operating normally. 3. Operators and maintenance personnel should always pay attention to keeping the equipment clean and tidy, eliminate dripping and leakage problems in time, and keep records of problems that cannot be solved in time, and solve them after research. 4. All joints and water pipes of industrial EDI ultrapure water treatment equipment should be checked regularly, such as whether there is any looseness or damage, etc., and attention should be paid to anti-freezing, and the operation of high-pressure pumps and water pumps should also be Regular inspections should be carried out, and problems should be solved in time if problems are found. In addition, attention should be paid to antifreeze in winter. 5. Regularly replace the filters and PP cotton of industrial EDI ultrapure water treatment equipment to ensure that the water treatment standards are within the scope. 6. Check the operation of the water pump and high-pressure pump regularly, and report any problems in time. 7. The operator should find out the cause immediately and report in time if the equipment is found to be abnormal. If in an emergency, take decisive measures. For faults that cannot be eliminated by themselves and the cause of the fault is not clear, the operator cannot blindly turn on the equipment. Unhandled problems should be carefully recorded and repaired by professionals, waiting for professionals to deal with. 8. Frequently check whether the electrical control box connector has fallen off or disconnected, and must ensure the safety of electricity. The above content is an introduction to environmental protection for the proper maintenance of industrial EDI ultrapure water treatment equipment. I hope it will be helpful to everyone. The correct maintenance of industrial EDI ultrapure water treatment equipment can make the equipment work more stable. The ultrapure water system should How to maintain and whether the maintenance is correct is also related to the water quality of industrial EDI ultrapure water treatment equipment.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标