How to use the reverse osmosis membrane cleaning agent for small and medium industrial water softeni

How to use the reverse osmosis membrane cleaning agent for small and medium industrial water softening equipment?

by:Ocpuritech     2021-06-18
How small and medium industrial water softening equipment, reverse osmosis membrane cleaning agent author of the article:? With the rapid development of the domestic economy, my country's industrial development is also growing rapidly, industrial water quality requirements are also increasing. Small and medium-sized industrial water softening equipment mainly uses cationic resin to soften water. The main purpose is to use cationic resin to absorb calcium and magnesium ions in the water, reduce the hardness of the water, and can also regenerate the resin and recycle it. Small and medium-sized industrial softening water equipment adopts advanced softening water treatment technology, and the performance of the product is safe and stable. The use method of the reverse osmosis membrane cleaner for industrial water softening equipment is as follows: 1. Connection of the cleaning pipeline: The cleaning can be carried out directly on the equipment. At this time, only a PE hose needs to be connected to the water inlet of the high pressure pump. The water outlet is still connected to the water inlet connector of the reverse osmosis membrane shell. At the same time, unscrew the concentrated water outlet connector of the reverse osmosis membrane shell, and connect an anti-corrosion hose. You can also remove the reverse osmosis membrane from the equipment and use a separate cleaning device for cleaning. 2. Use a clean container, add pure water, and then add a certain amount of cleaning agent. After fully stirring and dissolving, insert the high-pressure pump inlet pipe into the cleaning agent solution, start the high-pressure pump, and suck the agent into the reverse osmosis membrane shell. Start the cleaning cycle operation. The cleaning time is 1-2 hours. 3. The selection and use of cleaning agents should be based on the local tap water conditions. Generally, the quality of tap water with harder water and water with more organic matter will be different. 4. After the cleaning operation is completed, reinstall and restore the equipment, turn on the faucet, run with water for 20 minutes, clean, and then resume normal use. The cleaning time of each agent is generally not more than 2 hours. Generally, the water production of the reverse osmosis membrane will be significantly restored after cleaning. If the reverse osmosis membrane is severely clogged, or the recovery of the water production is not obvious after cleaning, the membrane cleaning agent can be pumped into the reverse osmosis membrane shell again, and the agent can be kept in the membrane shell and soaked for 12 hours before cleaning.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标