Industrial pure water treatment equipment
of stainless steel standard operation procedure is what?
Nowadays, low standard of water pollution in cities, enterprises can use tap water directly.
In order to better meet the demand of water, industrial stainless steel, industrial pure water treatment equipment for food industry.
It can filter out impurities such as heavy metals, bacteria, microorganisms in the water.
A non-professional and also because there is no proper use of industrial stainless steel water treatment equipment lead to the water quality is poor, today was the environmental protection personnel about industrial stainless steel water treatment equipment for you correct operation method.
1, the first response to reverse osmosis
host button on the control panel of instrument parts, such as understanding and familiar with, can know their USES.
2, before the first boot, should first observe the drain (
Activated carbon filter drain valve open can observe)
To ensure that its clean the dirt at the end of the carbon impurities such as to close the drain valve.
After open the drain valve of the microporous membrane fine filter, for the clean water and then close the drain valve.
3, check the host part and preprocessing part of each parts and components, as well as the adjustment of each valve switch state, make sure before running the waterways of smooth.
4, pressurized water pump inlet valve in a normally open state, water pump by-pass pipe backflow valve slightly open, moderate range.
5, sand filter on the by-pass pipe valve closed, sand filter inlet valve and open the water valve.
6, normally open industrial stainless steel water treatment equipment water valve, adjust after high-pressure pump pump throttle valve to the moderate state.
7, open the fine filter at the top of the exhaust valve, water after being equipment hydraulic stability, then close vent valves.
Eight, please put all the air switch in low voltage power distribution equipment are all close either.
9, to the sand filter, carbon filter and water softener on 220 volts and adjust the controller to achieve the running state.
10, host, power supply switch to no position on the control panel, at the same time start the pressurized water pump and high pressure water pump.
And open the inlet electromagnetic valve.
11, when open the power switch, should set reverse osmosis host automatic flushing function.
Power every time shut down, start, automatic flushing a.
When the power was turned off, timing to cancel, to return to zero, start timing again next time.
12, setting water pressure in the low voltage or high voltage state automatically shut down measures, and open automatically when water pressure is normal.
13, reverse osmosis system after the wash, can moderate adjustment after high pressure pump, throttle valve, make the film in front of the feed water pressure is not more than 15 kg/cm2.
At the same time under the strong water regulator to control water flow.
Looking for an innovative range of pure water treatment plant water treatment systems
products? Guangzhou Aomi Water Purification System Manufacture Co., Ltd. supplies a diverse range of consumer, commercial and specialty industrial products including water treatment systems, water purification unit, pure water treatment plant,etc.Click Ocpuritech water treatment to learn more!
Guangzhou Aomi Water Purification System
Manufacture Co., Ltd. offers best-in-class products, fast delivery time, and personable, highly competent, and unparalleled services.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. have significantly changed the way customers approach manufacturing. water treatment systems can still compete if we are willing to change the ways in producing.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. affords you a suitable low price for proving our ethical considerations.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. quickly recognized the power of efficient manufacturing and started proactively recruiting people to sell products.