Industry edi pure water treatment equipment high-pressure pump set manually adjust the function of t

Industry edi pure water treatment equipment high-pressure pump set manually adjust the function of the door?

by:Ocpuritech     2020-05-31
Edi industrial pure water treatment equipment is made up of reverse osmosis system, thus almost without impurities, no membrane element is the problem of pollution. In practical use, in addition to the secondary water reverse osmosis system is based on level 1 reverse osmosis system of water production as raw water, water reverse osmosis system are almost all the other ordinary after pretreatment of raw water. In addition to the despite pretreatment part of impurities, but compared with the standard test under the condition of water used, the water quality is still poor. In reverse osmosis system has an important component is the high pressure pump, here we introduce for everybody why behind the high pressure pump industry edi pure water treatment equipment should be set manually adjust the door and electric slowly open the door? In practical use, in accordance with the guide for the design of membrane element manufacturers provide used, but the pollution of reverse osmosis membrane element will still slowly, after a period of time, of course, can be achieved by chemical cleaning to get parts for their performance, but it is hard to fully recover its performance, so the design of the experienced personnel should be considered in the design of this problem, this time should be chosen to guarantee three years later to meet the design water rate of feed water pump, the need to design a higher pressure of feed water pump, but the system is the initial operation of don't need high pressure can meet the design water rate, so the system in the initial run time rich feed water pump pressure, with the passage of time, pressure rich gradually reduce, so the high-pressure pump should be set manually adjustable section behind the door to adjust water pressure. In some cases can be set to the feed water pump frequency conversion adjusting device, at this point you can use the method of frequency conversion to realize the adjustment of the feed water pressure. High-pressure pump door at the back of the manual adjustment after the set up generally don't need constant adjustment, over a period of time is basically in a constant position, every time the system startup also do not need to open and close the valve. But if no other valves behind the high pressure pump, every time when start the system, high pressure pump of high pressure water will directly impact the membrane element, especially in the system exists in the air can produce & other Water hammer & throughout; The phenomenon, such easy to cause the collapse of the membrane element. In order to prevent the occurrence of the above phenomenon, should set electric slow to open the door at the back of the high pressure pump, slowly open the electric slow to open the door after start the high pressure pump, which is loaded on to the system of reverse osmosis membrane pressure slowly, electric slow full closed the door should be fully open the valve and its full open full close time is adjustable, but a general setting of 45 ~ 60 s. So from a security perspective of reverse osmosis membrane element should be set electric slow to open the door. About why behind the high pressure pump industry edi pure water treatment equipment should be set manually adjust the door and electric slow to open the door of introduction to here, hope to be of service, also want to learn more about the contents of the edi industrial pure water treatment equipment, welcome to continue to focus on our website.
Many of us have heard about water treatment systems and seen some of these units in operation in pure water treatment plant, water purification unit and pure water treatment plant spaces.
Our vision serves as the framework for our water treatment systems and guides every aspect of our business by describing what we need to accomplish in order to continue achieving sustainable, quality growth.
Deeper connections between Guangzhou Aomi Water Purification System Manufacture Co., Ltd. and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. always believes that the average profitability of our company is sufficient.
Knowing what promotions are popular and get the most activity as water treatment systems from current and potential customers can play a role in your overall strategy.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标