Installation requirements and precautions for industrial automatic water softening equipment-Ocpurit

Installation requirements and precautions for industrial automatic water softening equipment?

by:Ocpuritech     2021-04-19
Installation requirements and precautions for industrial automatic water softening equipment? Author of the article: Water for us is not missing, and how the quality of water industry has been concerned about the general public?. Nowadays, the automatic water softening equipment for household industry has brought convenience to our lives. This article mainly introduces why the automatic water softening equipment for household industry is so popular among users. Industrial automatic water softening equipment can help companies save costs, especially environmental protection. But how to install industrial automatic water softening equipment, this problem seems simple, but there are some important points that we cannot ignore. Let the environmental protection editor tell you what you need to pay attention to when installing industrial automatic water softening equipment. 1. The foundation of industrial automatic water softening equipment should be stable, 250 ~ 450nm away from the wall, and can be set at the corner according to the actual situation. 2. The inlet and outlet pipes of the industrial automatic water softening equipment are all connected by standard flanges or threaded connections, which need to be fixed and supported well, and cannot be supported by the valve body to prevent stress. 3. A water pressure gauge is installed on the inlet pipe of the industrial automatic softening water equipment. When the equipment is running, the flushing water will be discharged, and a drainage ditch should be provided. 4. The brine tank of the industrial automatic water softening equipment should be close to the resin tank, and the brine pipe should be as short as possible. 5. The sewage pipe of industrial automatic water softening equipment should not be 6 meters long, and the outlet should not be higher than the valve body. The terminal prevents siphoning. The fewer elbows, the better. 6. Electrical sockets should be installed near the installation of industrial automatic water softening equipment, and fuses should be installed inside to ensure good grounding. Precautions for industrial automatic water softening equipment: 1. The working temperature range of industrial automatic water softening equipment must be maintained at 2C-50C, and prevent freezing in winter. 2. When it is out of service for a long time, close the main valve to cut off the water and electricity of the water softener. When using the electronic control, you must first turn on the power, adjust the time, and let the water out for 3 minutes. 3. The best water inlet pressure is 0.2-0.5MPa, higher than 0.5MPa plus decompression device. 4. Add non-iodized salt to the salt tank, and it shall not exceed 2/3 of the height of the salt tank at most. 5. When the water hardness is higher than 450mg/L, it is recommended to increase the one-level selection. 6. The consumption of regeneration salt is about 1kg
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标