Cherish Life From Source,let’s Get Purified Water With The Water Treatment Systems- Ocpuritech Water Treatment Machine Manufacturer & Ro System Supplier
Cherish Life From Source,let’s Get Purified Water With The Water Treatment Systems- Ocpuritech Water Treatment Machine Manufacturer & Ro System Supplier
Most water purifiers use a PP filter cartridge for the first stage of the filter element. The first stage of the filter element is not only directly affects the water quality but also affects the subsequent secondary or tertiary filtration effect and the life of the filter element. Therefore, the quality of PP filter is especially important for water purifiers.
PP filter cartridge uses food-grade polypropylene as raw material with the process of hot melting spray, traction, and winding.
It is constructed of a loosened layer, compacted layer and precise layer to ensure highly efficient filtration performance.
It can remove some impurities like suspended substances, particles and rust effectively.
Ocpuritech can provide stable available PP filter cartridge for our customer, 10”20” or 40” with different microns like 5micron, 10mciron,20micron, and 1micron.
Besides, we also make customized PP melt blown filter cartridge as per customer’s requested.
Advantage
Large flow rate
corrosion resistance
high-pressure resistance
low cost
PP filter cartridge uses food-grade polypropylene as raw material with the process of hot melting spray, traction, and winding. It is constructed of the loosened layer, compacted layer and precise layer to ensure highly efficient filtration performance. PP filter core is uniform and dense, filtration precision It can remove some impurities like suspended substances, particles and rust effectively. The bigger apertures of the pores have sufficient space to hold larger particulates, smaller apertures stop smaller particulates, ensuring high filtration efficiency and increasing service lifespan. The service of a lifespan of PP filter cartridge is 3 to 6 months.
PP Type: Three kinds of PP can be supplied. Such as：
In addition, this three kinds of PP has various length like 10”,20”,30” and 40” with different microns such as 1 micron, 5 microns, 10 microns, 20 microns, 50 microns, and 100 microns.
Besides these PP filter cunts as a weight like 100g,105g,100g,115g,120g,130g so on. We can make customized weight as per buyer’s request.
PP filter is measured by Inner dia and outer dia. So generally ID range is 28-30mm, OD range is 60-63mm for all sizes of PP.
★ Our pp filter has high fiber density and good hardness. If the filter element is squeezed hard, it will not be pinched. Even if you are an adult standing on the filter, it will not be significantly deformed and the filtration effect will be 99%.
★ Needle-punched PP cotton increases the surface area of clean water and increases the amount of dirt. The surface of the groove is more likely to cause the impurities to fall off without sticking to the PP filter, which also improves the service life of the PP filter to some extent.
★ Ocpuritech is a filter cartridge production manufacture that provides the lowest and cheapest price directly to the clients．
Noted for using PP filter：
The PP filter is the first stage of the water purifier. More than 80% of the impurities will be filtered in the first stage pp filter cartridge and the more impurities are filtered, the more easily the filter is clogged, In areas with poor water quality, it may take more than two months to replace the filter element. In order to avoid secondary pollution of the water purifier and affect the filtration effect of the filter element behind it, it is recommended to replace the filter element every 3-6 months.
Workshop
Type
Type
8 Filtering for Food & Beverage
PP filter cartridge is widely used in industrial water treatment, household machines, etc. PP filter is required as the first stage of pretreatment. It is a link that cannot be removed during the pretreatment process. If the RO system is not equipped with a PP filter, the raw water directly enters the RO membrane. Excessive particles, precipitates, microorganisms, and bacterial viruses that are not treated will block in the RO membrane, and the life of the RO membrane will be shortened, which will also affect the quality of the final water.
Application of PP filter:
10 inch PP filter is generally used in household machines, such as RO household machines and ultrafiltration household machines.
20-inch PP filter is generally used in RO commercial machines and small-flow RO industrial machines.
30-inch or 40-inch PP filter is placed in a precision filter for high-flow industrial equipment.
It can also be applied to pre-treatment machine or filter separately for all sizes of PP filter.
50" PP Wound Cartridge Filter for water treatment provide true depth filtration, high dirt holding capacity, and extremely low media migration. They are a superior, one-piece cartridge manufactured using a high speed, continuous wind process, and are available in a wide variety of lengths and porosities. Especially significant is the availability of filters in an almost endless combination of media and core material, to handle virtually any chemical and/or environment or temperature.
50" PP Wound Cartridge Filter for water treatment
Feature:
1.Material:100% PP
2.One PP core without any connection
3.Micron:1,5,10,25,50um
Applications
Model: UNPS-(A)-(B)-(C)-(D)-(E)-(F)
A. Media
PP ( 100% Pure Polypropylene FDA approval )
PF ( Fibre-free Polypropylene )
FGB ( Baked Micro Fibreglass )
FG ( Standard Micro Fibreglass )
BC ( Bleached Cotton )
NC ( Natural Cotton )
FP ( Silicon-free Fibrillated Polypropylene )
B. Core Material:
PP( Standard Polypropylene )
S4 ( Stainless Steel 304 )
S6 ( Stainless Steel 304 )
TS ( Tin plated steel )
SSP( Reinforced Stanless Steel Strip Welding )
C. Micron Rating:
0.5,1,3,5,10,20,25,50,100,150um
D. The Length:
5" (127mm & 132mm ),10"(250 & 254mm) ,20" (500mm & 508mm) ,30" (750mm & 762mm),40"( 1000mm & 1016mm), 50"(1250mm & 1270mm) ,60" (1500mm) ,70", & 80"
E.The Diameter: ID 28mm or 30mm
OD from 50 to 200mm
F.End Style: Double open end
222 O Ring + Closed ( Fin )
225 O Ring + Closed ( Fin )
226 O Ring + Closed ( Fin )
Q1. Can I have a sample order for filter cartridge?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks after the payment.
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Length | ID | OD |
10" | 28mm | 60mm±1 |
20" | 28mm | 60mm±1 |
30" | 28mm | 60mm±1 |
40" | 28mm | 60mm±1 |
Copyright © 2018 Guangzhou Aomi Water Purification System Manufacture Co., Ltd. | All Rights Reserved by www.ocpuritech.com
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
