Several factors for determining water volume in Guangdong food and beverage reverse osmosis purified

Several factors for determining water volume in Guangdong food and beverage reverse osmosis purified water equipment

by:Ocpuritech     2021-04-08
Guangdong food and drink pure water reverse osmosis equipment to determine the amount of water a few elements of the article: the food and beverage industry, the more important is the quality of products, with the advancement of global health community is urgently pursue people, food and beverage industry products more stringent requirements. Now ordinary well water and tap water can no longer meet the quality requirements of the food industry. Now the food and beverage industry generally uses reverse osmosis purified water equipment for food and beverage, and the water produced by the equipment is pure water. The definition of purified water is a kind of drinking water that is free of viruses and bacteria, does not contain any suspended matter and soluble salts, and has removed various organic and inorganic chemical pollutants. It is characterized by pure to pure, sweet and mellow water that meets sanitary standards and does not need to be boiled for drinking. With the development of food and beverages, a large number of food and beverage reverse osmosis purified water equipment have appeared on the market. What is the water output is a question for everyone. The following environmental protection will introduce how to judge the water production of food and beverage reverse osmosis purified water equipment? 1. Food and beverage single-stage reverse osmosis equipment Food and beverage single-stage reverse osmosis equipment is that raw water and tap water are processed by a pretreatment system, and then pressurized by a high-pressure pump to enter the RO membrane for treatment, and then produce water and purify water. The simpler way to judge is that there is only one high-pressure pump on the device. Understand this, let's take a look at how to judge the water output of the equipment. 2. Understand the determinants of water production: the model and number of RO membranes. When we go to a water treatment equipment company to buy water treatment equipment, they will ask us how much water treatment equipment we need to buy, that is, how much water production equipment is needed. , We must first understand that the water production volume of water treatment equipment is determined by the RO membrane. There are two types of RO membranes, 4 inches and 8 inches. They are generally installed in the RO membrane shell. There are a 4-inch small membrane shell and an 8-inch large membrane shell. The materials are mainly glass fiber reinforced plastic and stainless steel. There are mainly one shell, one core, and one shell. Two types of shells (two RO membranes in one membrane shell). 3. Count the membrane shells to calculate the water production. Count the membrane shells to calculate the water production. To know the water production of a single-stage reverse leakage equipment, we must first look at whether it is a large membrane or a small membrane, and then count how many RO membrane shells there are, and look at the length to determine whether the RO membrane is one shell, one core or one shell. With two cores, the water output of the equipment is obtained by calculation. 4. Common 4-inch RO membrane commercial membrane, a single 4-inch diameter small membrane, has a water production rate of 0.25T/H. Generally, what we see is the membrane shell of the equipment. We can ask the water treatment equipment manufacturer to disassemble and install the RO membrane for us on site. The water output of 1 ton of single-stage equipment is 0.25T/H/piece*4 piecesu003d1T/H. A membrane shell with one shell and one core can be used. 5. Common 8-inch RO membrane commercial membrane The water output of a single 8-inch large membrane is 1T/H. When the water output of the equipment we need is large, the manufacturer will use a large 8-inch membrane for us, so that not only the water production is large, but the number of membranes is also small, and the equipment has a compact structure and beautiful appearance. The water output of 6 tons of single-stage equipment u003d 1T/H/piece*6 pieces, RO membrane shell uses three membrane shells with one shell and two cores. The water production volume of the anti-leakage equipment has been reduced. With the continuous advancement of technology, the reverse osmosis equipment produced by Environmental Protection Engineering Co., Ltd. has met the water needs of different industries.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标