Ultrapure water device manufacturer to teach you to install reverse osmosis
1, check whether there is any scratch on inside the container or not perfect place, corrosion products and external impurities (
Including lubricating oil too much)
Should be shipped out;
2, rinse containers to remove all the dust and particles;
3, with about 50% of the glycerin & ndash;
Lubricating water mixture inside the container, it is best to dab a mixture of appropriate size of the mop later, lubrication, this step can make the load of membrane element easier, but also reduce the possibility of a container wall by scratches.
4, put the first membrane element into inlet pressure vessel, element end outside the container leave a few inches in order to connect the next membrane element.
5, use a small amount of lubricant lubrication O ring connector.
6, to load under a membrane element and an aligned before, and put it before assembly to have a good membrane element connection on the connector.
7, the two membrane element into the container, until there is only a few inches in the container outside.
Repeat these steps until all the membrane element loading.
Note: in the final membrane element after the installation, all membrane element must be pushed forward again, don't be too the membrane element to push forward, if it would then be difficult to push back again.
Guangzhou Aomi Water Purification System
Manufacture Co., Ltd. offers a ton of features and capabilities to help you acquire and retain customers, boost sales and manage contacts.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. is proud to be recognized as some of the most important and influential providers for global customers.Visit us at Ocpuritech water treatment.
Guangzhou Aomi Water Purification System Manufacture Co., Ltd. really created a whole persona around water treatment systems’s manufacturing and selling, and it's so innovative that people really respond to it.