What are the installation requirements for reverse osmosis water purification equipment for small-sc

What are the installation requirements for reverse osmosis water purification equipment for small-scale food industries before use?

by:Ocpuritech     2021-03-11
What are the installation requirements for reverse osmosis water purification equipment for small-scale food industries before use? Author: now more and more serious water pollution, people own food have a new understanding of food production in some water also have certain requirements, so the health requirements are also getting attention. Sometimes the small details we produce may determine the quality of our products, and some manufacturers use small industrial reverse osmosis water purification equipment. Small industrial reverse osmosis water purification treatment equipment can run stably. Based on good process performance and accurate installation steps, conventional small industrial reverse osmosis water purification equipment basically consists of a pretreatment device, a reverse osmosis host, and a sterilization and disinfection system. How to install small-scale industrial reverse osmosis water purification equipment, and what are the precautions? Today, environmental protection experts will tell you its conventional installation steps. 1. After the equipment is transported to the production workshop, it should be safely placed in a place close to the water source. The indoor temperature should be greater than or equal to 5°C, and the upper temperature limit should not be greater than 38°C. If the indoor temperature is too high during the production process, it will The equipment caused serious damage, strengthen ventilation measures to reduce the indoor temperature. 2. Packing filter materials such as quartz sand, activated carbon and resin. 3. Water connection: including the raw water pump inlet connected to the raw water source port, the pretreatment filter outlet connected to the reverse osmosis host inlet, and the host outlet connected to the sewer. If the connection between the pipe and the pipe is necessary, the sealing treatment and the degreasing treatment should be carried out. 4. Circuit connection: First, connect the grounding wire to the ground reliably, and connect the supplied power cord to the electrical control box of the room. Precautions for small-scale industrial reverse osmosis water purification equipment: 1. When installing the equipment, turn off the switch of the water intake part, install a ball valve at the water intake point, and select the appropriate PE pipe to connect to the water inlet of the equipment. 2. All pipelines of the small-scale industrial reverse osmosis water purification treatment equipment need to be strictly inspected and meet the sanitary standards. 3. Turn on the water source switch and flush the ball valve for five minutes until black water no longer appears at the flushing port, and then close the ball valve. 4. Turn on the water inlet switch and rinse for more than 15 minutes to ensure that there is no residue in the equipment, and then it can be used normally. 5. If you are not ready to test the water and pass the water, do not open all the important valves. Accurate installation promotes the stability of small industrial reverse osmosis water purification treatment equipment. Will not cause unnecessary trouble for subsequent use. In order to facilitate the use of equipment by customers, environmental protection technology experts also compiled relevant articles on daily operation specifications and maintenance of small industrial reverse osmosis water purification equipment for everyone.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标