What are the precautions and structure of industrial automatic sewage treatment equipment?
What are the precautions and structure of industrial automatic sewage treatment equipment? Author: Our water pollution is serious, although it has a positive control, but not all of a sudden water pollution situation can be resolved. Industrial automatic sewage treatment equipment has played a vital role in the treatment of sewage and is a blessing for many industrial manufacturers. Since industrial automatic sewage treatment equipment is a relatively professional mechanical equipment, the price is often more expensive, and the equipment with good sewage treatment effects has even reached hundreds of thousands, which is scary. It is conceivable that once the equipment fails or the parts are damaged, the cost of repairing and replacing parts will be high. Therefore, in order to avoid such a situation, everyone must pay attention to the corresponding precautions for the correct use of industrial automatic sewage treatment equipment. Well, the editor is not too long-winded, here is a brief explanation of the precautions for the use of industrial fully automatic sewage treatment equipment. 1. The industrial automatic sewage treatment equipment is equipped with a fan. When using the sewage treatment equipment, the air inlet of the fan must be kept unblocked, and the oil needs to be replaced once the fan is running for about 6 months, which can increase the service life of the fan. 2. The inlet hole of the industrial automatic sewage treatment equipment must be well covered to prevent large pieces of solid material from entering the integrated sewage treatment equipment, causing blockage of the pipeline and damage to the orifice and pump. At the same time, attention should be paid to controlling the pH value of sewage. Acidic or alkaline sewage will affect the normal growth of biofilms. Generally, the PH value of integrated sewage treatment equipment can be controlled between 6-9. The use of wastewater treatment equipment in the industrial industry has the advantages of saving environmental costs, saving water costs, wastewater recovery rates up to 75%-95%, and direct treatment of 1-18M industrial water. Today, we take the products of industrial fully automatic sewage treatment equipment to explain the structure of the equipment. 1. Primary sedimentation tank: The primary sedimentation tank of the equipment is a vertical flow sedimentation tank. The rising speed of sewage in the sedimentation tank is 0.6 to 0.7 mm/sec. The settled sludge is lifted into the sludge tank by air. 2. Contact oxidation tank: After the initial settlement, water flows into the contact tank for biochemical treatment. The contact tank is divided into three stages, and the total residence time is greater than 1 hour. The contact oxidation time of the reinforced equipment can reach 6 hours, and the filler is a new type of trapezoidal filler. 3. Secondary sedimentation tank: After biochemical treatment, sewage flows to the secondary sedimentation tank. The secondary sedimentation tank is two parallel flow vertical flow sedimentation tanks. 4. Disinfection pool and disinfection device: The disinfection pool can extend the residence time to 1-1.5 hours, and adopt the solid chlorine contact dissolution disinfection method. The disinfection device can continuously change the dosage according to the amount of water to achieve more dosage. The purpose of less water and less dosage. Other disinfection devices can be prepared separately. 5. Sludge tank: All the sludge from the primary and secondary sedimentation tanks is lifted to the sludge tank of the reclaimed water reuse equipment for aerobic digestion. The effluent from the sludge tank is returned to the contact oxidation tank for reprocessing. 6. Fan room and fan: The fan room of the reclaimed water reuse equipment is located above the disinfection tank. The entrance adopts double-layer soundproofing. The air inlet has a muffler and a fan filter, so there is no noise during operation. Pay attention to these matters when using industrial automatic sewage treatment equipment, which can avoid many problems, so users may wish to learn. You get what you pay for, and the probability of problems with your industrial fully automatic sewage treatment equipment is relatively small. Therefore, the editor recommends that you choose mid-to-high-end equipment when purchasing industrial fully automatic sewage treatment equipment.
Contact Person: Ms.Carrie Chan
TEL : (+86)020-39185731
E-MAIL : firstname.lastname@example.org
Whatsapp/Wechat : +86-13751887537
Water Treatment System Add:9A,Building 8,Lianfa Industrial Park , Luopu Street, Panyu District, Guangzhou City, China
Water Filter Cartridge Add:Zhangcun village,Daze town, Xinhui district, Jiangmen City, Guangdong, China
Sign up for our newsletter
Get the latest news and updates from the leaders in water treatment and process separation.