What are the standard operating steps of the laboratory ultrapure water machine-Ocpuritech-img

What are the standard operating steps of the laboratory ultrapure water machine?

by:Ocpuritech     2021-05-28
What are the standard operating steps of the laboratory ultrapure water machine? Author: For laboratory studies, is one of ultra-pure water throughout the process of research and analysis important reagents for laboratory ultrapure water requirements are very strict, for a professional laboratory ultra-pure water It is necessary for the laboratory's ultrapure water machine. Here is an introduction to the operating procedures of the ultrapure water machine in the laboratory. 1. Check whether the water source stainless steel ball valve switch is turned on, whether the power cord is connected, and make sure it is turned on. 2. Press the 'Power' button, and the 'System Water Production' indicator will light up and start to work normally. 3. Every 2-3 days, please press the 'System Flush' button before taking water after starting up. At this time, the system is manually operated and flushed, and the flushing time is 1-2 minutes. After flushing, press the 'system flushing' switch again to automatically turn off. 4. Please keep the plastic ball valve on the water storage barrel in the same direction as the pipeline connection. It is open at this time. Do not turn off the ball valve switch. Do not twist the vacuum plug at the bottom of the water storage barrel, otherwise the water storage barrel will be scrapped. 5. Pre-pre-conditioner cleaning: When the instrument is used for a period of time, the white PP polymer fiber filter element begins to turn from white to yellow. At this time, use a special wrench to remove the pre-conditioner barrel and take out the fiber filter element with high pressure Rinse with tap water, you can tap and rinse until it is confirmed that it is cleaned and then reinstalled. When reinstalling, check whether the plastic rubber pad in the barrel is well padded, and make sure that the barrel does not leak after installation. If there is water leakage, remove it and check again. . Activated carbon cleaning is the same method. Under normal circumstances, the cleaning time is 2-3 months/time. The above content is an interpretation of the operating procedures of the ultrapure water machine in the laboratory, and I hope it will be helpful to everyone. Here, the editor warmly reminds everyone that you must use the laboratory ultrapure water machine in accordance with the operating instructions to avoid unnecessary losses due to operating errors.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标