What are the three flow control types of automatic boiler softening equipment-Ocpuritech-img

What are the three flow control types of automatic boiler softening equipment?

by:Ocpuritech     2021-06-02
What are the three flow control types of automatic boiler softening equipment? Author: enterprises boilers automatic boiler softening equipment required is mainly used in the international advanced technology and softened water preparation technology, equipment materials are of high quality glass, steel, stainless steel or carbon steel lined with plastic anti-corrosion materials, equipment quality Excellent, stable and reliable performance, fully automatic operation of boiler water softening equipment is realized, no special management is required, cost performance is higher than similar domestic products, and it has been widely used throughout the country with good results. 1. Single tank flow control type automatic boiler softening equipment: Among them, the single tank flow control type equipment will stop supplying soft water during regeneration. Therefore, if you choose this series of products, you need to be equipped with a soft water tank that can be used for at least two hours. 2. Double-tank flow control type softening water equipment: a double-tank flow control equipment composed of a control system and two resin tanks, salt tanks and related pipelines. The controller controls the production water, standby and The switching of regeneration ensures that there is always one tank in working condition at any time, which can continuously supply soft water. The softened water equipment has two resin tanks, one is used and the other is prepared. The regenerated tank enters the waiting state. Once one of the tanks enters the regeneration state automatically or manually, the other one automatically enters the working state immediately. The water output of this equipment will not change due to the equipment regeneration process. There are two resin tanks in the equipment, and the two tanks operate at the same time. The regeneration time is different. The exchange tank immediately starts to produce water after regeneration. When equipped with a phase tank, the theoretical water production of this equipment is twice that of the a series, but there are about three hours in each cycle (about 24 hours) of the equipment, one exchange tank is producing water, and the other is in a regeneration state. . 3. Three-tank flow control type water softening equipment: The automatic boiler softening equipment has three resin tanks, which are dual-use and one-standby. The regenerated exchange tank automatically enters the standby state. Once one of the other two tanks enters the regeneration state automatically or manually, the spare tank automatically enters the working state immediately. The water output of this equipment will not change due to the equipment regeneration process; the softened water equipment has three resin tanks, and the three tanks operate at the same time. The regeneration time is different. After regeneration, the exchange tank immediately starts to produce water. When equipped with the same tank, the theoretical water production of this softened water equipment is three times that of the 2-a series, but there are about four hours in each cycle (about 24 hours) of the equipment. The two exchange tanks are producing water. , The other one is in regeneration state.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标