What problems should be paid attention to in the operation and debugging of EDI reverse osmosis ultr

What problems should be paid attention to in the operation and debugging of EDI reverse osmosis ultrapure water equipment?

by:Ocpuritech     2021-07-14

What problems should be paid attention to in the operation and debugging of EDI reverse osmosis ultrapure water equipment? Author: As the reverse osmosis promote EDI ultra-pure water equipment, many industries are beginning to use EDI ultra-pure water reverse osmosis equipment, reverse osmosis and EDI ultra-pure water equipment gradually from commercial products to household water purification equipment. Some users are not particularly familiar with the operation and debugging of the equipment due to the first contact with EDI reverse osmosis ultrapure water equipment. The normal operation of EDI reverse osmosis ultrapure water equipment can ensure normal production and operation. The specific content is as follows: 1. EDI reverse osmosis ultrapure water equipment uses the principle of ion exchange to work, so it is necessary to ensure that the raw water quality meets the requirements of the equipment. 2. It should be installed in a clean and dry place, and the temperature should be above 0℃ to avoid the phenomenon that the resin inside the equipment is frosted or the internal parts are rusted to cause equipment failure. At the same time, regular cleaning and maintenance should be carried out during use to keep the equipment clean and operating normally. 3. Before running the EDI reverse osmosis ultrapure water equipment, check and tighten all the fixing bolts on the equipment. The bolts cannot be loosened. Make sure that the shell of the switchboard is grounded. If possible, it is best to separate the switchboard from the equipment, and be careful not to connect the wrong wiring number. 4. When the EDI reverse osmosis ultrapure water equipment is running, the time relay should not be adjusted. The power supply must be cut off when the equipment is repaired and cleaned. Water and electricity are supplied at the same time when the equipment is running, and water and electricity are cut off at the same time when the equipment is out of operation. 5. Regular maintenance is required every year. If it is not used for more than half a month, the waste water pipe should be lifted to a height above the exchange column until it is not draining. Lubricating oil should be added to the rotation and transmission parts to prevent corrosion.           


Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标