Why is the resin often damaged in the use of automatic boiler softening water treatment equipment-Oc

Why is the resin often damaged in the use of automatic boiler softening water treatment equipment

by:Ocpuritech     2021-06-15
Why automatic boiler softened water treatment equipment often use resin corrupted author of the article: Water is an essential resource for people's lives, but also an important industrial material. Most people are exposed to hard water. If the hard water is heated directly in the boiler without treatment, it will cause harm to the boiler equipment. The currently used automatic boiler softening water treatment equipment is to remove calcium and magnesium ions in the raw water and the elements that cause the boiler to grow scale. However, many people are very familiar with automatic boiler softening water treatment equipment. The editor of the company will explain to you why the resin is often damaged in the automatic boiler softening water treatment equipment? The main reasons are: 1. Dryness. Automatic boiler softening water treatment equipment resin particles will gradually lose internal moisture when exposed to the air, and the resin particles will gradually become smaller. 2. When the automatic boiler softening water treatment equipment is backwashed, the resin and mechanical friction will occur due to the relatively large impact of the water flow, which will cause mechanical breakage. 3. The resin of the automatic boiler softening water treatment equipment is frozen, and the water contained in the resin particles will freeze below zero, and the volume expansion will cause the resin particles to crack. To prevent the resin of automatic boiler softening water treatment equipment from being frozen, transportation should be avoided during the freezing period. 4. The oxidation of the oxidizing substances in the water causes the resin to degrade or damage the structure, and the resin is deteriorated and broken. 5. The temperature of the automatic boiler softening water treatment equipment is too high, which causes the stability of the resin to decrease, and the mechanical strength begins to decrease. 6. The influence of osmotic pressure. Under normal operation of the automatic boiler softening water treatment equipment, the resin particles will produce internal stress of expansion or contraction during the failure process. In long-term use, the resin repeatedly expands and contracts repeatedly to cause cracks or breakage of the resin. 7. Poor resin quality is also a major reason. Some water softening equipment manufacturers use low-quality resin to save costs. The crushing strength of this inferior resin particle is low after grinding, and a lot of damage will occur. 8. Improper storage and management, the water in the resin is lost, because it is dry or not only used, but the resin swells when it encounters water.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标